KS Hot Tapping & Line Stopping Specialist

+6(03) 7982 5611
ks.hottapping@hotmail.com

KS Hot Tapping

Hot Tapping is a process of making a new connection point on an under pressured pipeline without shutdown or disruption of the flow.

KS Line Stopping

Line Stopping is a process of temporary stopping a section of the pipeline with a by-pass for a continuous flow in order to do relocation and maintainance works without disrupting the water flow.

KS Pipe Freezing

KS Pipe Freezing involve the usage of liquid nitrogen to form a solid ice plug inside the pipeline using specilized techniques and equipements. This method is able to withstand high
pressures and it is a fast and effective method to isolate the line for modifications or repair works to be carried out.

KS Impact Moling

KS Impact Moling is a trenchless technology that is fast and low cost method for installation of pipes, cables and ducts from 20mm Diameter up to 150mm Diameter with a distance from 5 metres up to 25 metres through various ground types.

KS 25 Manual Handtap Machine

KS25 Manual Handtap Machine is capable to tap from 12mm - 23mm Diameter hole size on Mild Steel Pipe, Ductile Iron Pipe, Cast Iron Pipe, AB3P Pipe, UPVC Pipe, and also HDPE Pipe. Ks 25 is designed to withstand water pressure up to 16 Bar (232 psi).

1.	KS25 Tapping Machine
2.	Ratchet
3.	12mm MS Cutter
4.	18mm MS Cutter
5.	23mm MS Cutter
6.	16mm SS Cutter (For plastic pipe only)
7.	Customized spanner
8.	Adjustable F spannar
9.	1/4" Bleeding Valve
10.	Tapping Machine Adaptor
11.	Tool Box
12.	User Manual

* Special cutter size (12mm - 25mm) is available and must be purchased separately.

KS 25S Manual Handtap Machine

KS25 additional accessories to use on Swivel Ferrule.

KS 50 Tapping Machine

KS50 Tapping Machine is capable to tap from 25mm – 50mm Diameter hole size on Mild Steel Pipe, Ductile Iron Pipe, Cast Iron Pipe, AB3P Pipe, UPVC Pipe, and also HDPE Pipe. KS 50 is designed to withstand water pressure up to 16 Bar (232 psi).

This set includes:

1 No	KS 50 Tapping Machine
1 No	Boring Bar
1 Set	Allan Key Set
2 Nos	Shaft Locking Pin
1 No	3/8" Bleeding Valve
1 No	Adjustable Spanner
1 No	1½” Housing (to suit holesaw 32mm and below)
1 No	2” Housing ( to suit holesaw 42mm and below)
1 Set	Holesaw Attachments
2 Nos	8mm Pilot Drill with Retention Wire
1 No	25mm Bi-Metal Holesaw
1 No	32mm Bi-Metal Holesaw
1 No	42mm Bi-Metal Holesaw
1 Set	Spare Rubber ‘O’ Ring
1 No	Tool Box

* Special cutter size is available and must be purchased separately.